Providing ultimate protection for carers when transporting infected patients
1 x Chamber
1 x Motor case
1 x Bag
2 Gloves to allow for patient manipulation
2 Sealing plugs for passing pipes
3 Patient Straps
2 Stretcher Straps
During the manufacturing process, the chamber undergoes a 5-hour air. Tightness test under positive pressure.
Cable/Pipe connections are colour coded for easy operation (e.g. blue cable to blue connector).
The chamber is made from airtight 300 micron crystal clear polyurethane.
A welded airtight zip fastener allows the chamber to be opened and closed.
Patient treatment is made possible by the inclusion of a pair of neoprene gloves that comply with the PPE Directive (category 3).
The following standards have been applied to the gloves:
Protective against ionizing radiation and radioactive contamination
Protective against chemicals and micro-organisms
Protective against mechanical risks.
|Length||35.4 inches (90cms)||74.0 inches (188cms)|
|Width||17.7 inches (45cms)||24.0 inches (61cms)|
|Depth||3.93 inches (10cms)||22.0 inches (56cms)|
|Weight||15.6 lbs (7kg)||15.6 lbs (7kg)|
|DIMENSIONS||0.6 x 3.3 x 3.9 inches (1.5 x 8.3 x 22.8cms)|
|SUCTION CAPACITY||3.93 inches (10cms)|
|BATTERY LIFE||8 Hours|
|CHARGE TIME||+ - 6 Hours|
CLEANING AND STORAGE
Disinfection and cleaning with conventional ANIOS/SURFANIOS products and other veridical/bactericidal disinfectant detergents according
to the spectrum of pathogens to be eliminated.
Please refer directly to the user instructions and procedures for these products.